Condensation & Mould Control
 

'Get rid of Mould before it damages your health

Home

Shop

Contact

FAQ

About

Y-Mould Paint Additive




Y-Mould
Benefits

"Y-Mould" - can be added to any emulsion no matter the color or make

"Y-Mould" - will ensure NO germination of "Black Spot Mould" for up to two years

"Y-Mould" - will give peace of mind from the infections by "Black Spot Mould"


Description

Y -MOULD is a concentrated fungal additive for use in water based emulsions, masonry paints, putties or other wall coatings.

Y -MOULD gives an active film which resists growth of Black Spot Mould (Aspergillus spp) in areas prone to condensation.

Y-MOULD is insoluble in water and can be wiped without affecting its activity.

Y-MOULD will resist growth of Algae externally when added to a masonry paint.

How to Use Y-Mould

  1. Add contents (120g) into a 10 litres amount of water-based paint
  2. Mix thoroughly to disperse the Y-MOULD.
  3. Dispose of empty container in a responsible manner.
  4. Use paint in normal way.

Precautions to be noted when using Y-Mould
1
 Keep material in original container
2
 Store out at reach of children.
3
 Add the Y-MOULD into the paint and thoroughly mix immediately.
4
 Do not inhale fumes from the container.
5

Wash spillage’s with water.
6
 If in contact with skin wash off immediately with soap and water.
7
If in contact with eyes, rinse with clean water for at least 15 minutes, seek medical advice.
8
 If swallowed do not induce vomiting, drink plenty of water and seek medical advice.
9
 Dispose of empty container in a responsible way.
10
 Do not use empty container

Copyright 2006 Damp-Problems